================================================================
K24 - 24-CHANNEL PRO TOOLS TEMPLATE
================================================================
Free to use. No attribution required.
diegoferri.com - @k24.berlin


WHAT THIS IS
----------------------------------------------------------------
This session file is a starting point for multitrack sessions -
the same template I use for location work, stripped of anything
hardware-specific to my rig.

24 input tracks and four stereo cue mixes for the musicians.
Stock EQ and compression are set on every channel, but bypassed.
It opens ready on any Pro Tools system, with no third-party
plugins to install.

Remap the I/O to your interface and start recording.


SAMPLE RATE & BIT DEPTH
----------------------------------------------------------------
Since the sample rate is fixed when a session is created,
the template ships in two versions: 48 kHz and 44.1 kHz.
Use 48k when working with video - it syncs better.

Recording is 32-bit float, so internal processing never
compromises the signal. Change it if needed in:
Setup > Session


ROUTING
----------------------------------------------------------------
Drums and keyboards are controlled by a VCA.

Bus 1-2 and 3-4    ->  two reverbs on separate auxes
Bus 5-6            ->  Cue 1  (musician headphone feed)
Bus 7-8            ->  Cue 2  (musician headphone feed)
Bus 9-10           ->  Cue 3  (musician headphone feed)
Bus 11-12          ->  Cue 4  (musician headphone feed)

Four stereo cue mixes = eight output channels. Map them to
outputs 3-10 on your interface (or wherever suits your routing)
in Setup > I/O.


INSERTS
----------------------------------------------------------------
Insert 1: utility plugins: phase inverters for snare bottom
and kick, and gates for the toms, to be used as needed.
Insert 2: channel equalizers
Insert 3: dynamics


CONTACT
----------------------------------------------------------------
diego.ferri@gmail.com
@k24.berlin
diegoferri.com
